Početna

Nesortirano

Svi proizvodi

Traži po proizvodima

Mikrofon AT875R audio-technica

Name: Mikrofon AT875R audio-technica
Brand: AUDIO TECHNICA
SKU: 4975828

LOKACIJE TRGOVINA

LINE + GRADIENT CONDENSER MICROPHONE, 175mm The AT875R requires 11V to 52V DC phantom power for operation. Output from the microphone’s XLRM-type connector is low impedan... Pročitaj cijeli opis

436,00 KM

Brzo do ponude

436,00 KM

+ troškovi dostave

Više o ponudi

Ponuda trgovine setup za proizvod Mikrofon AT875R audio-technica. Ispravnost cijene i podataka provjeri na web stranici trgovine.

Parametri proizvoda

Mikrofon AT875R audio-technica

Glavni parametri

Važna informacija

Ovi se podaci prikupljaju sa službenih stranica proizvoda. Provjerite detalje prije nego što nastavite do konačne kupnje. Ako primijetite problem, možete ga prijaviti ovdje .

Brzo do ponude

Proizvođač

Cuin

CX004BECD4

Prijavi grešku

SLIČNI PROIZVODI

Više o proizvodu

Studijski mikrofon AT2020 audio-technica

u setup

246,00 KM

Više o proizvodu

Mikrofon studijski AT2020USB+ audio-technica

u setup

418,00 KM

Više o proizvodu

AT8666RSP Baza za mikrofon audio-technica

u setup

308,00 KM

Više o proizvodu

Mikrofon PRO44 audio-technica

u setup

330,00 KM

Više o proizvodu

Mikrofon MB2K audio-technica

u setup

129,80 KM

Više o proizvodu

Bubica mikrofon AT829CW audio-technica

u setup

180,00 KM

Više o proizvodu

Mikrofon MB1K audio-technica

u setup

124,30 KM

Više o proizvodu

Mikrofon žičani ATM510 audio-technica

u setup

280,50 KM

LINE + GRADIENT CONDENSER MICROPHONE, 175mm The AT875R requires 11V to 52V DC phantom power for operation. Output from the microphone’s XLRM-type connector is low impedance (Lo-Z) balanced.The signal appears across Pins 2 and 3; Pin 1 is ground (shield).Output phase is “Pin 2 hot” – positive acoustic pressure produces positive voltage at Pin 2. To avoid phase cancellation and poor sound, all mic cables must be wired consistently:Pin 1-to-Pin 1, etc. The high sensitivity of the AT875R assures useful output and an excellent match to most input sources.In some cases, however, an attenuator such as the Audio-Technica AT8202 may be required between the microphone and preamplifier to avoid overloading sensitive input stages. The microphone is RoHS compliant–free from all substances specified in the EU directive on hazardous substances. Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods.Extremely high humidity should also be avoided. • Designed for video production and broadcast (ENG/EFP) audio acquisition• Extremely short length (under 7”) ideal for use with compact digital cameras• Provides the narrow acceptance angle desirable for long-distance sound pickup• Excellent sound rejection from the sides and rear of mic• Tailored response minimizes camera and handling noise• Operates on phantom power only Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Line + gradientFrequency Response: 90-20,000 hzOpen Circuit Sensitivity: -30dB (31.6mV), re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 107 dB, 1 kHz at Max SPLSignal-to-Noise Ratio: 74 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalWeight: 80 gDimensions: 175.0 mm (6.89”) long, 21.0 mm (0.83”) diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Included: AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8”-16 threaded adapter; AT8133 windscreen; soft protective case

Mikrofon AT875R audio-technica

436,00 KM

u setup

Brzo do ponude

Mikrofon AT875R audio-technica

Parametri proizvoda

Mikrofon AT875R audio-technica

Važna informacija

SLIČNI PROIZVODI

POVEZANI PROIZVODI